NASA Logo, National Aeronautics and Space Administration

National Aeronautics and Space Administration

Goddard Space Flight Center

Astrophysics Science Division | Sciences and Exploration

This website is kept for archival purposes only and is no longer updated.

THE HUBBLE SPACE TELESCOPE
OVERVIEW HUBBLE NEWS OPERATIONS TECHNOLOGY SERVICING MISSIONS HUBBLE MULTIMEDIA PRODUCTS

+ Home
ABOUT NASA
SERVICING MISSION INTRODUCTION
HUBBLE SM4
HUBBLE SM3B
HUBBLE SM3A
HUBBLE SM2
HUBBLE SM1
HUBBLE DEPLOYMENT

INTRODUCTION
During the first spacewalk of SM4, astronauts John Grunsfeld and Andrew Feustel install Wide Field Camera 3  

Hubble is reborn
After a seven year rollercoaster ride of go/no-go for the fifth and final Hubble servicing mission, Service Mission 4 (SM4) was finally flown in May 11-24, 2009.

During the mission two new scientific instruments were installed: the Cosmic Origins Spectrograph (COS) and Wide Field Camera 3 (WFC3). Two failed instruments, the Space Telescope Imaging Spectrograph (STIS) and the Advanced Camera for Surveys (ACS), were brought back to life by the first ever on orbit repairs. With these efforts Hubble has been brought to the apex of its scientific capabilities.

To prolong Hubble's life, new batteries, new gyroscopes, a new science computer, a refurbished guidance sensor and new insulation on three electronics bays were also accomplished over the 12-day mission with five spacewalks. Additionally, a device was attached to the base of the telescope to facilitate de-orbiting when the telescope is eventually decommissioned, which should not occur before 2014.

     
  Hubble to be Serviced Again
Administrator Michael Griffin's decision on October 31, 2006 to fly servicing mission SM4 in mid- to late-2008 will bring unique capabilities to Hubble in the form of two new science instruments, Cosmic Origins Spectrograph and Wide Field Camera 3. New gyros and batteries will extend Hubble's life through 2014.

     
Servicing Hubble   Past Servicing of Hubble
In four Space Shuttle Servicing Missions (SM) dating to December, 1993, astronaut crews performed vital servicing tasks on the Hubble Space Telescope (HST), both extending operating life with the replacement of aging hardware, and enhancing scientific capability by very large factors with the installation of advanced science instruments incorporating new cutting-edge technologies. Maintaining and upgrading the telescope in such a way was part of the Hubble mission plan going back to the Program's earliest days, and this foresight produced a modular telescope design which permitted astronaut-friendly servicing operations.

The periodic maintenance and upgrading of Hubble has clearly been the key to its success as one of the premier scientific facilities in human history, and mission-by-mission descriptions of the telescope's servicing can be viewed by clicking on the links to the left (for example, "SM1").